Sandstone tiles ina bathroom
Posted: Sat Dec 13, 2008 12:25 am
by jezsoup
I have bought a load of sandstone tiles for my bathroom, however the floor is floorbaords...
Someone mentioned the idea of using basboards as found in wickes to screw down over the boards, would this work or just be a stupid idea?
http://www.awin1.com/awclick.php?mid=15 ... nvt/220205
Posted: Sat Dec 13, 2008 3:33 pm
by stoneyboy
jezsoup,
The baseboards you refer to will be useless - they are only 9.5mm thick and will introduce more flexing than you already have.
You need to assess how stable the floorboards are at the moment and fix them down so that you cannot detect any movement as you walk on them. You may need to reinforce some of the joists to give a stable floor, especially if the bathroom has been refitted in the past.
If you cannot achieve a stable floor you will probably have to use 18 or 25mm thick WPB plywood.
Stick the tiles down using one the special adhesives which include latex.
end
Posted: Wed Jan 28, 2009 10:50 am
by TheDoctor5
If you type the key words of your question into our search box to the left of the site you may find the answer is already posted or is in the DIY projects section of the website. Every post goes through a monitoring process and using the search box may speed up your answer.