Tiling over cork
Advice and information on tiling and fixing tiles to a variety of surfaces

3 posts   •   Page 1 of 1
Northiam
Labourer
Labourer
Posts: 2
Joined: Tue Jan 06, 2009 1:40 pm

Tiling over cork

by Northiam » Tue Jan 06, 2009 1:51 pm

I have a concrete floor with embedded underfloor heating that is covered with cork tiles. They are the original tiles and have been down 30 years. They are firm (ie not spongy) and very securely fixed. (I know because I tried to remove a couple and it look hours to remove just some of the adhesive.) I would like to lay some Amtico vinyl tiles using their HT adhesive (specially formulated for underfloor heating etc). I know that the 'correct' way is to remove the cork and re-screed the floor, but this would be very difficult (have to remove all furniture etc etc.). Does anyone have experience of laying over the existing cork?

stoneyboy
Project Manager
Project Manager
Posts: 6529
Joined: Wed Dec 10, 2008 6:44 pm

by stoneyboy » Wed Jan 07, 2009 6:24 pm

Northiam,
There is a good chance that if you tile over the cork the amtico tiles will curl at the edges due to the polish/glue which has been used on the cork.
Strip and apply a self levelling compound will be the only sure way of success.
end

TheDoctor5
Posts: 1381
Joined: Tue Jan 20, 2009 9:17 am

by TheDoctor5 » Wed Jan 28, 2009 10:53 am

If you type the key words of your question into our search box to the left of the site you may find the answer is already posted or is in the DIY projects section of the website. Every post goes through a monitoring process and using the search box may speed up your answer.

3 posts   •   Page 1 of 1
It is currently Tue Nov 05, 2024 2:03 pm