fixing sink to plasterboard wall
Posted: Tue Mar 13, 2007 9:21 pm
by matt2675
What would be the appropriate plugs and bolts/screws to use for fixing my cloakroom sink to a plasterboard wall? your help would be much apprieciated.
Posted: Fri Mar 16, 2007 1:47 pm
by thedoctor
MANY OF THE ANSWERS TO YOUR POSTS CAN BE FOUND, WITH DIAGRAMS, IN THE DIYDOCTOR PROJECTS SECTION. CLICK HERE
www.diydoctor.org.uk/projects.htm
Posted: Thu Jul 12, 2007 10:14 pm
by LEO292
A tough one Matt. Choose the height you want and draw a line with a spirit level. Offer the sink up to the line and get someone to mark the screw holes through the sink which can be found at the bottom. drill the holes with a 5mm wood bit. Insert wurly fixings into the holes (these are known as metal plasterboard fixings at the builders merchants). squirt white silicone onto the back of the sink and place onto wall. Screw through the holes in the sink and silicone carefully around the sink. Leave for couple of hours and plumb in the water. Job done. Hope this helps. Leo.