Page 1 of 1
fire regs for stairs
Posted: Sat Dec 29, 2007 5:31 pm
by jacki
we want to take our hall wall away so the stairs come straight into the lounge. Can we do with fire regs or does stairs have to be enclosed?? :?:
Posted: Sat Jan 05, 2008 4:27 pm
by Jim357
hi there.. i am no expert.. but..
you will need to let us know more..i.e.
is it a flat or a detached house.. first floor or second or attic stairs..
i hope you find the answer... or you can call the council, and they can put you in touch with someone who knows.. in the planning office.. or visit thier planning web site.. and find answers there maybe.
good luck
jim
Posted: Sat Jan 05, 2008 4:32 pm
by thedoctor
See our project on building regulations and click through to the Planning portal web site where you can read all the regs. It is the Building Control Department of your local council you need to sopeak to, not the planning office.
Posted: Tue Jan 29, 2008 11:21 am
by jacki
Thanks Jim
I contacted the building control dept and he says we can take the wall down providing we put fire jump windows in upstairs.
weve applied for buliding regs now we cant decide do we use a steel lintel and cover it or put in an oak beam. Its a cottage any views ??
Posted: Wed Jan 30, 2008 9:20 pm
by bd3cc
If Building regs are all you need, you don't apply for them, you notify them that you are carrying out the works, pay the inspection fee, and then take their advice, because they have to sign the works off.
As to a steel, versus oak beam, they will advise on sizes for both, depending on the stresses applicable.
Your council website is usually very helpful.