Wooden driveway gates lock problem
Post your questions and find answers on all garden related topics and areas

2 posts   •   Page 1 of 1
G4WFT
Labourer
Labourer
Posts: 1
Joined: Fri Jun 11, 2021 4:44 pm

Wooden driveway gates lock problem

by G4WFT » Fri Jun 11, 2021 5:15 pm

We've recently had wooden gates fitted across our driveway, consisting of one 2.7m main gate and a 0.9m pedestrian gate. As we wanted to be able to secure them at night, there is a throw over hook on the main gate which drops over a staple on the small gate. A padlock then goes through the staple. This has all worked fine to begin with, but over time (the gates were installed mid-April this year) the hook has become more and more difficult to drop over the staple until it is now impossible. Neither gate has dropped - it seems as though the gates have shrunk! Is this possible or likely? I know that I could move the staple slightly closer but if it's shrinkage then will the gates expand again in the autumn/winter? The gates are, I believe, Douglas Fir. Thanks for any insight.

stoneyboy
Project Manager
Project Manager
Posts: 6535
Joined: Wed Dec 10, 2008 6:44 pm

Re: Wooden driveway gates lock problem

by stoneyboy » Sun Jun 13, 2021 10:10 pm

Hi g4wft
Yes the gates will expand and contract with the weather, remove the hook and staple and use a bike lock loop or heavy chain and padlock instead.
Regards S

2 posts   •   Page 1 of 1
It is currently Wed Dec 04, 2024 9:04 am