New Build - internal/external cracks All manner of questions and solutions to problems and issues surrounding the subject of brickwork, blockwork and stonework

[AdeJ]

New build, completed Sept05, internal and external cavity walls with Celcon blocks on concrete blocks below dpc - metre deep footings on sand/greensand site.

Have noticed vertical cracks externally and corresponding internally - ie cracked blocks inside and outside beneath quite large pvc casement windows. However, no diagonal cracking at the corners of windows. External rendered - internal plastered. The cracks are hairline and been refilled twice now but keep re-appearing

No cracks beneath these below DPC where Celcon meets the concrete blocked footings.

Keep being told "Just shrinkage" - but inside and outside, same locations - each about 2 metres from same corner - 3 years down the line?

Any advice very welcome, thanks.

[stuart C]

This is quite common with these type of blocks. The cracks stop at the DPC.

[AdeJ]

[quote="stuart C"]This is quite common with these type of blocks. The cracks stop at the DPC.[/quote]

Thanks for that reassurance - any way to stop it though,; have used acryllic sealant, polyfilla, etc. still keep reappearing. :(

[welsh brickie]

with celcon blocks the mortar used must be weaker than usual,so I assume the mortar was quite strong causing to much expansion .
but nothing major to worry about.

[TheDoctor5]

Last year 64% of the questions asked in our forum were answered within our DIY project pages at www.diydoctor.org.uk/projects.htm The project pages are now separated alphabetically and your answers are accompanied by diagrams and the ability to see, and buy, the tools and/or required to complete your project. Use our search box to look for your answer and save a great deal of time and money!