re-pointing old stonework in cellar
All manner of questions and solutions to problems and issues surrounding the subject of brickwork, blockwork and stonework

3 posts   •   Page 1 of 1
justinfrance
Labourer
Labourer
Posts: 2
Joined: Sat Feb 07, 2009 11:28 pm

re-pointing old stonework in cellar

by justinfrance » Sat Feb 07, 2009 11:34 pm

looking for advice on repointing old stonework in the cellar of my house in france, which dates from around 1900. the cellar is not humid, and seems well-ventilated but the mortar between the stone, which is in good nick, is crumbling in a lot of places - i take it either because of time, or because it has been badly done in between times. thanks

tim reeve
Tradesman
Tradesman
Posts: 29
Joined: Mon Nov 10, 2008 6:17 pm

by tim reeve » Sun Feb 08, 2009 9:04 pm

I would rake out the joints between the stone using a pick hammer.Sand supplied in france is very course, so i would mix 4 parts sand to 1 cement.Wet the joints down with water before you start pointing.Force the cemet in with a pointing towel, as the cement hardens brush it with a soft brush.I hope this will help you.

justinfrance
Labourer
Labourer
Posts: 2
Joined: Sat Feb 07, 2009 11:28 pm

by justinfrance » Mon Feb 09, 2009 1:37 pm

thanks for the reply. any idea on drying time - or how long i should wait before covering the walls with insulation and gyproc? my plan is to refurbish the cellar.

3 posts   •   Page 1 of 1
It is currently Mon Nov 25, 2024 1:32 pm