Knock Down Dividing Wall Between Two Door Openings
All manner of questions and solutions to problems and issues surrounding the subject of brickwork, blockwork and stonework

2 posts   •   Page 1 of 1
hawkim1
Labourer
Labourer
Posts: 1
Joined: Tue Aug 02, 2016 11:37 am

Knock Down Dividing Wall Between Two Door Openings

by hawkim1 » Wed Aug 03, 2016 12:36 pm

Hi All,
I looking on for some advice on the best way to handle knocking down a dividing wall between our bathroom and Toilet. We want to block up the Bathroom door and use the existing toilet door. The wall is not a load bearing wall and is laid on the floorboards. The problem I have is that the two doorways (one in to the bathroom and the other in to the toilet are set in between the wall I want to knock down). I’m not sure of the best method to get the wall down and block up the bathroom door with causing problems . I have attached a picture to make it a bit clear.
Any advice will be welcome.
Attachments
Bathroom wall-sm23.jpg

welsh brickie
Project Manager
Project Manager
Posts: 2610
Joined: Sat Apr 12, 2008 8:54 am

Re: Knock Down Dividing Wall Between Two Door Openings

by welsh brickie » Sun Aug 07, 2016 7:01 pm

you don't need to use blocks, you can use 4 x 2 timber, insulate and plasterboard

2 posts   •   Page 1 of 1
It is currently Sun Nov 10, 2024 7:09 am