63A or 80A rccb
Ask questions and find answers to many subjects relating to electrics and electrical work

3 posts   •   Page 1 of 1
steve bain
Posts: 31
Joined: Tue Jan 20, 2009 2:43 pm

63A or 80A rccb

by steve bain » Tue Dec 08, 2009 11:24 pm

what is the difference between 63A and 80A RCCB's? is one just capable of taking more power through it?
if i have a 100A main incomer with 2 63A rccb (17th Ed) is it safe to swap one of them to an 80A?
my 63A RCCB has broken and i have a spare 80A in box (like you do!). just want to make sure it is ok and safe before i get someone out and potential waste their time and my money.



Posts: 198
Joined: Sat Feb 21, 2009 11:32 am

by moggy1968 » Wed Dec 09, 2009 9:54 pm

If this is just an RCD it provides no overcurrent protection so as you surmise the rating is just the current it can stand.
If it is an RCBO it is a measure of it's trip current

Project Manager
Project Manager
Posts: 2853
Joined: Fri Oct 02, 2009 9:49 pm
Location: Llanfair Caereinion, Mid Wales.

by ericmark » Thu Dec 10, 2009 9:09 am

Going up in amps is not a problem as long as it does fit.
There are three ratings
1) Amount of amps it can handle with out over heating i.e. 80
2) The amount of amps it can switch which will be a lot higher. In 1000's of amps range and is matched to let through amps on main fuse. i.e. The few thousand amps that's flows for few milli-seconds before fuse blows on short circuit.
3) The amount of amps it trips at i.e. 0.03A
You need to check all three match.

3 posts   •   Page 1 of 1
It is currently Wed Apr 24, 2024 1:42 am