BALLAST PROBLEM - KEEPS BLOWING
Ask questions and find answers to many subjects relating to electrics and electrical work

3 posts   •   Page 1 of 1
danny0011
Labourer
Labourer
Posts: 4
Joined: Thu Oct 23, 2008 5:06 pm

BALLAST PROBLEM - KEEPS BLOWING

by danny0011 » Mon Jan 26, 2009 11:03 am

Hi,
i have a large light fitting in a shop which holds two 70watt flourescent tubes
these are run off a PHILIPS HF PERFORMER BALLAST i have had to have the ballast replaced but when it was done the ballast blow within 10 mins

the fitting is new and only been in around 5 months

the person who fitted the ballast is a site electrician but could not tell me why the ballast blow the first time or why this one had blown
any info would be helpfull
thanks

sparx
Project Manager
Project Manager
Posts: 2166
Joined: Wed Mar 21, 2007 8:33 pm
Location: The fifth continent.

by sparx » Mon Jan 26, 2009 11:00 pm

Hi, don't know why original ballast died, but is replacement correct rating for your 6Foot high frequency fitting or standard 5Foot type?
regards Sparx.

danny0011
Labourer
Labourer
Posts: 4
Joined: Thu Oct 23, 2008 5:06 pm

by danny0011 » Tue Jan 27, 2009 1:20 pm

Hi its a 6 Foot high frequency fitting 2 x 70watt tubes, one on each side of the fitting,
the ballast put in was a

HF-Performer II TLD 2x70watt Philips Ballast

is there anything in the fitting that would cause the ballast to blow
thanks

3 posts   •   Page 1 of 1
It is currently Mon May 20, 2024 5:18 pm