best way to fill in large hole before papering
General decorating topics, questions and answers. find help, tips and advice on completing your decorating projects

3 posts   •   Page 1 of 1
lizzie
Labourer
Labourer
Posts: 1
Joined: Fri Aug 22, 2008 11:28 am

best way to fill in large hole before papering

by lizzie » Fri Aug 22, 2008 11:32 am

There is a hole left in the wall where a double electrical socket was. It's quite deep. What is the best way to fill it? (ihaven't a clue)

TheDoctor4
Project Manager
Project Manager
Posts: 16777203
Joined: Tue Jul 24, 2007 10:12 am
Location: Somerset in the UK in Shepton mallet

by TheDoctor4 » Fri Aug 22, 2008 6:18 pm

Hi


Have you had a look at the DIY projects area. There are several projects that deal with filling holes: https://www.diydoctor.org.uk/projects.htm

chris_on_tour2002
Project Manager
Project Manager
Posts: 1024
Joined: Thu Aug 30, 2007 10:14 pm

by chris_on_tour2002 » Sat Aug 30, 2008 9:34 am

i would get a small bag of bonding plaster. apply in two or three stages allowing each to harden (don't have to wait until it has completely dried, just until hard enough to apply another layer).

with the final application use a plasterer's trowel to make it flush with the wall. once set you can use either finishing plaster or even polyfilla and a light sanding to get a nice skimmed finish. not a difficult job at all, just make sure that however you do it that there are no live cables still lingering. wet plaster (or wet anything) and electrics don't mix.

3 posts   •   Page 1 of 1
It is currently Tue Nov 26, 2024 6:57 pm