cutting upto skirting when removing a timber floor Kitchens, doors, rails, stud, tables, chairs, stair cases, garden furniture etc... Find answers and ask questions here!

[sbail]

Could anyone tell me which tool to use to cut upto skirting when removing the wooden floor menber from underneath it.

[thedoctor]

Not quite sure what a wooden floor member is but we are assuming you mean a floorboard. Use a tennon saw or wide, very sharp chislel if you only have one to do. If you have lots we would suggest buying a cheap Aligator, or Reciprocating saw. If you look in our project on replacing timber floors you will see all the equipent you need.

[sbail]

The only problem using a saw is that the timber floor board is on concrete so you can not get an up and down movement.

[biggles111]

Are you talking about your floor boards or floor JOISTS. If you are planning to remove your joists be advised that if the structure is a timber frame your walls may be supported on these joists too.
If not then I suggest use a saw that you dont mind blunting a few forward teeth off to partialy cut through the joist. As you near the bottom of the joist hammer a wedge of wood either side of the cut to raise it off the concrete then continue to saw or chisel through.

[sbail]

Removing a timber floor which is on concrete

thanks

Steve B