by nitro23456 »
Tue Oct 07, 2008 7:33 pm
its prbably the pressure relief.
Normally happens when commissioning the unit if not done properly and is rare to happen again unless you have had the water off at all recently?
As chris says above, electric showers are very dangerous so seek pro advice. You could however try the following:
-turn shower on with the cold water setting selected (not hot water I or II) and the temp setting on 10
-twist the temp setting to 1 and then back to 10 a few times until you get a steady flow out of the head. It will either work or it wont.
Dont blame me if you die in the process however..... if you do I suppose you wont be here to blame me anyway!!