Flashing light?
Ask questions and find answers to many subjects relating to electrics and electrical work

2 posts   •   Page 1 of 1
obnox
Labourer
Labourer
Posts: 1
Joined: Fri Oct 30, 2009 10:43 am

Flashing light?

by obnox » Fri Oct 30, 2009 10:48 am

Hi, small problem. I installed some low voltage downlights in a bedroom cupboard with a PIR sensor hoping it would switch on when the doors are opened. I took a live(loop) and Neutral from the bedroom light fitting to the PIR following the PIR's instructions and then to the transformer.

I powered it up, the bedroom light came on alrite but when switched off, it started flashing.

Any ideas what i have done wrong??

Thanks.

sparx
Project Manager
Project Manager
Posts: 2166
Joined: Wed Mar 21, 2007 8:33 pm
Location: The fifth continent.

by sparx » Fri Oct 30, 2009 5:45 pm

the PIR must not be lit by the lights it is controlling, why didn't you just use a £2 door switch made for the purpose?
the pir workes by sensing a moving heat source, initially you!
when you close the door it turns off after its set time delay, but the heat decaying from the lamp is enough to retrigger it & repeat ad infinitum!
Try a cold lamp (LED), or shield PIR (Not easy in cupboard) or change to door switch (preferable) as very reliable, see your fridge!
regards Sparx

2 posts   •   Page 1 of 1
It is currently Sat May 18, 2024 7:20 am