Has my neighbour built loft conversion to regs
Re-generate an old or tired space and give it a fresh breath of life. Click here for answers, information and tips

5 posts   •   Page 1 of 1
sarahjharris
Labourer
Labourer
Posts: 2
Joined: Sun Nov 23, 2008 10:47 am

Has my neighbour built loft conversion to regs

by sarahjharris » Sun Nov 23, 2008 10:53 am

Our neighbours recently converted their attic, they did not ask us permission to carry out work on the party wall, (old terraced house with the fire party wall not built above knee level) they did not build a brick wall, just put up a wall, would they have done this to regulations? would they have had to ask us to carry out work? would have they cut in to our supporting beams to carry out the work properly? we are worried as we are thinking of converting ours, but thinking of sound proofing and safety etc? what can we do if they have not built their conversion to building regs? can we write to our council?

eljaybee
Ganger
Ganger
Posts: 78
Joined: Sun Jun 22, 2008 12:53 pm

by eljaybee » Sun Nov 23, 2008 7:55 pm

Give the Building Control Section at you local council a telephone call and express your concerns.

It is possible to form a fire and sound proof wall using a timber stud construction but this is not normally done. Can you see the timber studs of their wall???

sarahjharris
Labourer
Labourer
Posts: 2
Joined: Sun Nov 23, 2008 10:47 am

by sarahjharris » Tue Nov 25, 2008 9:22 pm

[quote="eljaybee"]Give the Building Control Section at you local council a telephone call and express your concerns.

It is possible to form a fire and sound proof wall using a timber stud construction but this is not normally done. Can you see the timber studs of their wall???[/quote] yes you can see the timber studs they are just batons!! look really flimsy ! thanks 4 your advice

eljaybee
Ganger
Ganger
Posts: 78
Joined: Sun Jun 22, 2008 12:53 pm

by eljaybee » Wed Nov 26, 2008 9:33 pm

If you can see the studs then I would have a concern that the wall had not been formed correctly as to get a timber stud suitably fire rated then it must have suitabler plasterboard from both sides.

Definately contact your local Building Control

TheDoctor5
Posts: 1381
Joined: Tue Jan 20, 2009 9:17 am

by TheDoctor5 » Fri Jan 30, 2009 9:12 am

If you type the key words of your question into our search box to the left of the site you may find the answer is already posted or is in the DIY projects section of the website. Every post goes through a monitoring process and using the search box may speed up your answer.

5 posts   •   Page 1 of 1
It is currently Sun Dec 22, 2024 8:44 am