Overhang on Raised Patio area
Post your questions and get answers regarding all areas of drives, pathways and patios

2 posts   •   Page 1 of 1
bevamoir
Labourer
Labourer
Posts: 1
Joined: Thu May 17, 2007 7:29 pm

Overhang on Raised Patio area

by bevamoir » Thu May 17, 2007 7:36 pm

We are due to get our patio finished tomorrow however the edge of the raised patio overhangs the brick underneath by about 3 inches in places. It means that some of the slabs are not joined with sealant and therefore sitting with gaps in the joins.

When asked about the overhang we were advised this is to allow drainage so it doesn't soak on the bricks underneath.

My question is this normal procedure for a raised patio or should it be flush with the lower brick, we are worried slabs may break with this overhang.

Any answers appreciated as guys back on site for last day tomorrow.

thedoctor
Posts: 2530
Joined: Sat Apr 08, 2006 1:15 pm

by thedoctor » Fri May 18, 2007 8:40 pm

Overhang is the proper way to do it but 3 inches is a lot. Normally a 25mm - 50mm overhang is sufficiant and it forms a drip to, as you builders say, stop any surface water running down the face of the brick.

2 posts   •   Page 1 of 1
It is currently Sun Feb 18, 2024 8:44 pm