Triton T80 Shower Cuts out After About Two Minutes Drainage and wastage systems and plumbing help, advice and answers

[janey129]

I have a triton t80i shower. it cuts out after approx 2 mins. before it cuts out it appears to run cooler. the light stays on the unit and the pullcord switch. if i return to it approx 10-15 mins later it will run again. the water pressure appears to be the same. I have tried running it on a cold setting but it still cuts out. Its approximately 2 years old and has been problem free since fitting. Should i just rip it out as ive been told they arent a very good shower unit or can i save some hard earned and limited cash by fixing this one??? HELP!!!

[endpoint101]

Stumbled across this thread whilst researching why our Triton T80 Si is having the same issue. Looks highly likely it's the solenoid, which can be replaced for about a tenner.. unless you need the valve assembly done as well, which will cost you upwards of £35. Worth going for the solenoid alone, and seeing if that works for £10. Looks simple enough to test it with a multimeter & prob about 10 minutes to swap out.

[endpoint101]

FYI, I ended up getting a replacement solenoid for about £13 (incl. postage).. fitted it myself in about 5 minutes & the problem is solved. Definitely worth trying this before buying a totally new shower unit.

[melving.crane]

Actually I was going through with the same issue as mentioned here, so looking forward to try the replacement with solenoid, hope it'll fix the issue.