Changing a ceiling rose fitting to a spotlight
Ask questions and find answers to many subjects relating to electrics and electrical work

3 posts   •   Page 1 of 1
JerryOS
Labourer
Labourer
Posts: 2
Joined: Sat Aug 18, 2007 12:35 pm

Changing a ceiling rose fitting to a spotlight

by JerryOS » Sat Aug 18, 2007 12:45 pm

Hi there!

I am new to this and a beginner when it comes to DiY so hope someone can help.

I want to change 2 light fittings in my kitchen/diner area. Currently i have 2 ceiling rose lights and want to replace them with halogen spots. I can't get at the wiring from above so need to do everything from below.

The spots are connected by the blue and brown wires coming from the rose.
Can i get away with connecting the wiring from the rose blocks into terminal blocks and then poking the lot through the new hole for the spots or do i have to use a junction box? If it is a junction box, then would a 5 amp 4 way junction box be ok as this is the only one smaller than the actual hole for the spot?

Hope this makes sense.

J.

andy.blackpool
Apprentice
Apprentice
Posts: 20
Joined: Sat Aug 25, 2007 12:04 am

by andy.blackpool » Sat Aug 25, 2007 8:39 am

Use a 5 amp junction box

JerryOS
Labourer
Labourer
Posts: 2
Joined: Sat Aug 18, 2007 12:35 pm

by JerryOS » Fri Aug 31, 2007 12:11 pm

Cheers for that Andy. Used one and it works fine. Really pleased with it.

Jerry.

3 posts   •   Page 1 of 1
It is currently Fri Nov 08, 2024 6:48 am