Removing Dead Wires and how to do This Safely?
Ask questions and find answers to many subjects relating to electrics and electrical work

3 posts   •   Page 1 of 1
ID015
Apprentice
Apprentice
Posts: 9
Joined: Fri Sep 09, 2016 2:02 pm

Removing Dead Wires and how to do This Safely?

by ID015 » Sun Oct 16, 2016 9:27 pm

There is a dead wire that is poking in and out of one wall and I would like some suggestions in what would be the best course to remove it.

I tested and it's dead; it's an old house so I am suspecting it used to bring power outside, though the cable outside is cut off and there's another similar wire inside but it's also cut off.

I am dying to pull it cause I don't like it visually - though needs to be done safely.

Ideas?

kbrownie
Project Manager
Project Manager
Posts: 1995
Joined: Mon Mar 05, 2007 9:36 pm

Re: Removing Dead Wires and how to do This Safely?

by kbrownie » Mon Oct 17, 2016 9:23 pm

I would suggest that you do a continuity test on the conductors, to establish that they are one of the same cable, then pull it out!

ID015
Apprentice
Apprentice
Posts: 9
Joined: Fri Sep 09, 2016 2:02 pm

Re: Removing Dead Wires and how to do This Safely?

by ID015 » Wed Nov 30, 2016 4:39 pm

I found the wire at the end!!!! It connects the old door bell which is powered by batteries. I guess when it was installed wireless door bells didn't exist!

3 posts   •   Page 1 of 1
It is currently Fri Nov 15, 2024 2:45 pm