How to Raise Level of Block Work Rendered Wall in Spain
All manner of questions and solutions to problems and issues surrounding the subject of brickwork, blockwork and stonework

4 posts   •   Page 1 of 1
Magik58
Labourer
Labourer
Posts: 4
Joined: Fri Jan 22, 2016 12:14 pm

How to Raise Level of Block Work Rendered Wall in Spain

by Magik58 » Wed Jan 11, 2017 3:05 pm

Hi
Need advice on how to raise the level of a rendered block work wall I have attached photos of the wall. I want to raise level of the two pillars by two blocks and then fill in between them. The wall is rendered and covered in tiny stones or grit that is thrown at the render as its drying. I want to cover this with just standard render I can paint. My questions are as follows
Do I need to remove all the render or can I use blocks just short of it and then apply scratch coat to level it and the apply finish coat over all the wall ?
Do I need to incorporate steel, the wall is 2m high max.
What mortar mix do I need ? (Spain)
What render mix for scratch and finish (Spain)
Should I use wall starter strips at the pillars ?
Think that's it.
[
Attachments
image.jpeg
image.jpeg

thedoctor
Posts: 2530
Joined: Sat Apr 08, 2006 1:15 pm

Re: How to Raise Level of Block Work Rendered Wall in Spain

by thedoctor » Mon Jan 16, 2017 6:38 pm

My questions are as follows
Do I need to remove all the render or can I use blocks just short of it and then apply scratch coat to level it and the apply finish coat over all the wall ?

You can but I would suggest building the new work flush with the existing ad applying a scratch coat over both after painting the existing work with a PVA/water mix of 2 - 1

Do I need to incorporate steel, the wall is 2m high max.
Not necesssary

What mortar mix do I need ? (Spain)
4 sand - 1 cement

What render mix for scratch and finish (Spain)
Scratch = 5 sand - 1 cement - Finish 4 sand - 1 cement

Should I use wall starter strips at the pillars ?
Yes if the wall is 2m high it will ensure stability

Magik58
Labourer
Labourer
Posts: 4
Joined: Fri Jan 22, 2016 12:14 pm

Re: How to Raise Level of Block Work Rendered Wall in Spain

by Magik58 » Tue Jan 17, 2017 4:13 pm

Hi thedoctor
Many thanks for your reply and advice.
I have ordered some wall starters from screwfix eu as not available in Spain, so should be able to start work in a few days.

Muchas gracias

Magik58

Magik58
Labourer
Labourer
Posts: 4
Joined: Fri Jan 22, 2016 12:14 pm

Re: How to Raise Level of Block Work Rendered Wall in Spain

by Magik58 » Mon Feb 13, 2017 2:51 pm

Hi
Just an update on my wall it is now complete as can be seen by attached pics i have never done any brick/blockwork before or any rendering so I'm very pleased with the result and would just like to thank you once again for the advice given.
Regards
Magik58
Attachments
IMG_2356.jpg
IMG_2367.jpg

4 posts   •   Page 1 of 1
It is currently Sat Dec 28, 2024 11:35 pm