Cut Wall Chase too Deep for Sink Hot and Cold Supply
All manner of questions and solutions to problems and issues surrounding the subject of brickwork, blockwork and stonework

3 posts   •   Page 1 of 1
Macca_andy
Labourer
Labourer
Posts: 2
Joined: Mon Feb 27, 2017 8:55 pm

Cut Wall Chase too Deep for Sink Hot and Cold Supply

by Macca_andy » Mon Feb 27, 2017 9:09 pm

Hi,

I was trying to chase a wall to put a hot and cold supply in (with insulation) to a sink. I used an SDS drill with chisel and things went way too deep (eek). It's even punched through the inner wall. Any tips on what I can do to sort this out? I've uploaded a couple of pictures.
Attachments
chase-1.png
chase-1.png (186.49 KiB) Viewed 2393 times
chase-2.png
chase-2.png (175.85 KiB) Viewed 2393 times

stoneyboy
Project Manager
Project Manager
Posts: 6532
Joined: Wed Dec 10, 2008 6:44 pm

Re: Cut Wall Chase too Deep for Sink Hot and Cold Supply

by stoneyboy » Mon Feb 27, 2017 10:54 pm

Hi Macca_andy,
I assume you ave pushed the bricks into the cavity, if this is the case retrieve as much as you can and rebuild back of the wall chase using a sand/cement mortar.
Regards, stoneyboy

Macca_andy
Labourer
Labourer
Posts: 2
Joined: Mon Feb 27, 2017 8:55 pm

Re: Cut Wall Chase too Deep for Sink Hot and Cold Supply

by Macca_andy » Tue Feb 28, 2017 7:00 am

Cool. That's great. Thanks.

3 posts   •   Page 1 of 1
It is currently Thu Nov 14, 2024 10:12 pm