Mitre Saw for Cutting Bricks With a Diamond Blade
All manner of questions and solutions to problems and issues surrounding the subject of brickwork, blockwork and stonework

3 posts   •   Page 1 of 1
Dwidge
Labourer
Labourer
Posts: 1
Joined: Sun Jul 19, 2015 11:09 am

Mitre Saw for Cutting Bricks With a Diamond Blade

by Dwidge » Sun Jul 19, 2015 11:14 am

Can anyone recommend a saw which will take a diamond blade and be suitable for cutting and mitring fire bricks? Needs to cut about 3 inches deep.

DIYDoctor2
Ganger
Ganger
Posts: 62
Joined: Mon May 19, 2014 10:53 am

Re: Mitre Saw for Cutting Bricks With a Diamond Blade

by DIYDoctor2 » Mon Sep 07, 2015 12:31 pm

Hi

You will need to use a 9 inch (230mm) angle grinder with your diamond blade, such as these ones here: https://www.diydoctor.org.uk/DIY-superst ... -disc.html

The best way to go is construct a jig for your grinder from timber and set it at the exact angle you need. You can buy angle grinder stands but I’m not sure they do stands for mitreing, although you could buy one and adapt it, such as this one: http://www.amazon.co.uk/Wolfcraft-50190 ... B000P3DX6K

It is possible to buy concrete/block mitre saws but they are hugely expensive.

Hope this helps

hellobob
Labourer
Labourer
Posts: 1
Joined: Sat Jul 15, 2017 5:38 pm

Re: Mitre Saw for Cutting Bricks With a Diamond Blade

by hellobob » Sat Jul 15, 2017 5:43 pm

Hi was having problems cutting bricks for my bay window 45° angles. I went to facing-bricks.co.uk and they sorted it. collected bricks from my house, cut and bonded them and delivered them back. a lot easier than doing it myself.

3 posts   •   Page 1 of 1
It is currently Sat Dec 28, 2024 11:01 pm