Hi all, I have taken a double light switch off (to remove some cladding it was mounted on) and one wire was not connected to anything. It may have popped out of the connection when I removed the cover.
I have put it back into the connection I thought likely but now when one of the switches is acting like a master switch for the other side.
There are 2 main wires into the switch. One has a bare copper, red and black. The other just has a red and it is this red one which was unconnected.
The switch has 6 connection options with a wire link from the bottom left to the top right.
Where should the single wire go?
Thanks for your time.