Corded Hammer Drill Selection and Which is Best for DIY?
Ask questions and find answers on all aspects of tools including hand & power tools.

4 posts   •   Page 1 of 1
manolaren
Labourer
Labourer
Posts: 1
Joined: Mon Jan 08, 2018 8:45 pm

Corded Hammer Drill Selection and Which is Best for DIY?

by manolaren » Mon Jan 08, 2018 9:03 pm

Hi. I m in need of a corded drill for non professional use, mostly for house tasks. I have a separate electric screwdriver so i need it only as a driller. Considering my low budget (35 euros max), I have a few in mind and i need some advice about them.

https://www.skil.co.uk/skil-6002-cb-ham ... 002cb.html
http://products.einhell.hu/hu_en/tools/ ... 0-1-e.html
http://products.einhell.hu/hu_en/tools/ ... 000-e.html
http://www.blackanddecker.com.au/en-au/ ... ll/kr504re
http://www.blackanddecker.co.uk/en-gb/p ... kr504cresk

Thank you in advance.

aleco135
Apprentice
Apprentice
Posts: 7
Joined: Thu Feb 01, 2018 7:51 pm

Re: Corded Hammer Drill Selection and Which is Best for DIY?

by aleco135 » Thu Feb 01, 2018 8:55 pm

Hello,
If your budget can stretch a bit I would recommend you get an SDS drill from a brand like dewalt/hitachi/bosch/makita etc.
I had many cheap percussion drills for diy and they didn't last long.
Bought myself cheapest makita sds drill I could and never looked back. I now use it for work doing all kinds of building maintenance and it's still going.
Hope that helps.
aleco

Shanto52
Labourer
Labourer
Posts: 2
Joined: Wed Oct 03, 2018 8:55 pm

Re: Corded Hammer Drill Selection and Which is Best for DIY?

by Shanto52 » Sat Oct 13, 2018 2:51 pm

I think DEWALT DCD985L2 – Best 20V Cordless Hammer Drill.

KitchenGuy
Ganger
Ganger
Posts: 66
Joined: Sun Aug 12, 2018 7:57 pm
Location: cardiff

Re: Corded Hammer Drill Selection and Which is Best for DIY?

by KitchenGuy » Sun Oct 14, 2018 12:28 am

Obviously it's better to get a pro drill if that's your budget but if not, then out of that list the Einhell ones have more power and look more substantial. They are obviously not the best make but they are far from the worst. Being honest, if you are just a DIY'er and use it occasionally it will most likely last you years. I have a Draper £35 hammer drill that I bought years ago when I was stuck on a job after forgetting the transformer and it is still going, albeit with a bit of a wobble in the bearings. If it was me I would go for the one with the conventional chuck. The quick change chucks are useful if you are changing bits a lot but a cheap one is likely to get real sticky and an SDS quick change chuck will stop you using it for grinding wheels or the many other accessories you may wish to use.

4 posts   •   Page 1 of 1
It is currently Thu Nov 21, 2024 3:59 pm