Removing a brace in the loft to fit carpet?
Information and advice on lofts and loft conversions. Find solutions and post your questions here...

3 posts   •   Page 1 of 1
DIYDodger123
Labourer
Labourer
Posts: 4
Joined: Sun Sep 06, 2020 1:35 pm

Removing a brace in the loft to fit carpet?

by DIYDodger123 » Sun Sep 06, 2020 3:38 pm

This brace is attached to the side of a loft beam. It is directly above the centre of the bedroom below so don’t see how it can be doing much.
Does anyone know if I can cut this to put a carpet down??
Attachments
B7B9FEB3-34C9-4D0C-AB7A-07D269E245E9.jpeg

stoneyboy
Project Manager
Project Manager
Posts: 6537
Joined: Wed Dec 10, 2008 6:44 pm

Re: Removing a brace in the loft to fit carpet?

by stoneyboy » Tue Sep 08, 2020 10:09 pm

Hi diydodger123
I doubt that such a flimsy piece of wood can be of any use except perhaps as a temporary support during construction. There probably should be a proper strut at this point with a birds mouth at the top end.
Fit a temporary strut and try removing the screws/nails and see how much the purlin drops - fit a new strut if needed after carpet fitting.
Regards S

DIYDodger123
Labourer
Labourer
Posts: 4
Joined: Sun Sep 06, 2020 1:35 pm

Re: Removing a brace in the loft to fit carpet?

by DIYDodger123 » Wed Sep 09, 2020 9:28 am

Thanks stoneyboy. Removed the brace and all looks fine. Think because we have installed flooring this has helped spread the weight

3 posts   •   Page 1 of 1
It is currently Sun Dec 22, 2024 3:00 am