Integrity of concrete roof to outbuilding
Information, help and advice on maintaining, installing and repairing a flat roof. Post your questions and view answers here

RedFred85
Labourer
Labourer
Posts: 1
Joined: Wed Jun 02, 2021 6:02 pm

Integrity of concrete roof to outbuilding

by RedFred85 » Thu Jun 03, 2021 11:44 am

Hi, I have a brick outbuilding with a concrete roof. Circa. 5x3 meters.

The external surface is coarse and weathered and water has gradually been making its way inside.

I am concerned about its integrity, although it does seem solid at the same time.

I have no experience with these roof types so don't know of this is typical of their condition.

I have had a roofer take a look and he advised to batten with sloping firrings, board with OSB and apply a GRP finish.

Two questions:
1. Does a GRP roof seem a good way forward?

2. Is the condition typical and likely to be sound?

Many thanks.
RED
Attachments
External Elevation
External Elevation
Internal 01
Internal 01
Internal 02
Internal 02
Internal 03
Internal 03

It is currently Mon Dec 02, 2024 8:40 am