Oak beams not tied into walls in old barn conversion - help please!
Information, help and solutions to many issues encountered when converting barns and older buildings

2 posts   •   Page 1 of 1
gazzastears
Labourer
Labourer
Posts: 1
Joined: Fri May 19, 2023 3:18 pm

Oak beams not tied into walls in old barn conversion - help please!

by gazzastears » Fri May 19, 2023 5:11 pm

I am in the process of renovating a barn conversion we bought 18 months ago and have come across the following problem. On removing the old kitchen I have found that a number of the oak beams on the ceiling are too short and dont reach the walls, they are just hanging from the ceiling and unsuported below. I believe these must have been left in for cosmetic reasons, but can see where the old brick pillars they once stood on are. Any ideas what I can do to resolve this, other than building the brick pillars back, or given they must have been like this for 20 years are they 'ok'?!
Attachments
IMG_5231.JPG
IMG_5156.JPG
IMG_5157.JPG
IMG_5227.JPG

stoneyboy
Project Manager
Project Manager
Posts: 6538
Joined: Wed Dec 10, 2008 6:44 pm

Re: Oak beams not tied into walls in old barn conversion - help please!

by stoneyboy » Sat May 20, 2023 9:24 pm

Hi gazzastears,
It certainly does not appear to be something to be left unchecked. Suggest you get a structural surveyor in and get it checked out.
Regards S

2 posts   •   Page 1 of 1
It is currently Mon Dec 30, 2024 5:41 pm