low voltage transformer
Ask questions and find answers to many subjects relating to electrics and electrical work

5 posts   •   Page 1 of 1
ma876
Apprentice
Apprentice
Posts: 10
Joined: Wed Sep 12, 2007 9:13 pm

low voltage transformer

by ma876 » Wed Oct 10, 2007 8:03 pm

hi this might seem like a silly question but what does VA stand for on transformers? I`m guessing its the output rating, if so what would a 150va transformer discharge in the form of amps, watts?

kbrownie
Project Manager
Project Manager
Posts: 1995
Joined: Mon Mar 05, 2007 9:36 pm

by kbrownie » Thu Oct 11, 2007 8:14 am

HI ma876,
VA stands for the maxmium Volt Amp Rating This is the sum of Volts X Amps
so say that your mains voltage was 230V then the current would be 0.652A. (230x0.652=150VA)
Regards
KB

ma876
Apprentice
Apprentice
Posts: 10
Joined: Wed Sep 12, 2007 9:13 pm

by ma876 » Thu Oct 11, 2007 10:55 pm

thanks kb, how would i work out how many 20w lamps i could run from a 150va transformer?

sparx
Project Manager
Project Manager
Posts: 2166
Joined: Wed Mar 21, 2007 8:33 pm
Location: The fifth continent.

by sparx » Fri Oct 12, 2007 10:38 pm

seven!
150 divided by 20 = 7.5 & as you can't buy half a lamp it's 7 with a bit to spare!,
VA is as KB says Volts X amps = watts for a purely resistive load, if inductive such as motors transformers ect, then power factor reduces actual power available which is why gen. sets have 2 ratings watts & VA.
Makers always advertise in VA as numbers more impressive, a bit like Americam horse power, only pony power to our way of measuring!!!
regards SPARX

ma876
Apprentice
Apprentice
Posts: 10
Joined: Wed Sep 12, 2007 9:13 pm

by ma876 » Sat Oct 13, 2007 4:53 pm

Thanx very much

5 posts   •   Page 1 of 1
It is currently Sat Nov 09, 2024 5:08 pm