t+g on t+g Help, advice, information, answers and tips on all types of flooring from laminate and carpet to timber and vinyl

[dibnah]

has anybody tried laying new tongue and groove on old t+g floorboards, I need to smarten up the upstairs floors, but supporting walls are stood on the floorboards! ceiling hight is over 9' so that is no prob. If its possible would I need a sheet of something first to take out the uneveness? Skirting is not down yet either!
Or, has anybody any other tips to smarten floors up!!

[stew]

I be suprised if you have supporting walls on the floorboards, i suspect they are devideing walls, but i know what you mean,
i be more inclined to hire a industrail sander one of them will take out the uneveness, i dont think its a good idear to fit new t-g over old t-g.

[dibnah]

[quote="stew"]I be suprised if you have supporting walls on the floorboards, i suspect they are devideing walls, but i know what you mean,
i be more inclined to hire a industrail sander one of them will take out the uneveness, i dont think its a good idear to fit new t-g over old t-g.[/quote][[quote]
Stew ta for info, I meant supporting wall below, dividing (but supporting) wall above!
Floor has been butchered beyond belief, and is not serviceable as is! (one or two well meaning mates doing jobs for daughter, c/h and rewire butchery of boards! I need a cheapish solution to pretty the place up rather quick, but don't want to go down the laminate floor road. It sounds so "false".
Place is a bomb site, they've totally gutted the place, but don't know how to put it right, so I've inherited a 'project'. [/quote]

[pablo2]

Hi there

try 6mm ply over the floor this will even things out then carpet . If you ply it should be stapled or better ring shank nails 25mm every 150mm , but before you do this make sure you have no more reason to remove the floor .

Pablo

[Tall Tone]

How about engineered boards (real wood) over underlay ontop of the T&G. Try Khars or Boen, good quality and will last for years.

[dibnah]

ta for the suggestions, what's engineered boards? and are they reasonable? will have shufty on't tinternet!
dibnah.