tiling bathroom
Advice and information on tiling and fixing tiles to a variety of surfaces

7 posts   •   Page 1 of 1
gary79
Apprentice
Apprentice
Posts: 10
Joined: Thu Nov 08, 2007 8:21 pm

tiling bathroom

by gary79 » Thu Nov 22, 2007 11:16 am

hi, ive tiled a few kitchen walls and so far so good. my inlaws have asked me to do their bathroom, i just want some advice firstly tho, whats best to do first, walls or floor? and any particular adheisives best? when i did the kitchen the grout seemed to look rough when it had dried, obviously it needs to be water proof i understand, but is the adheisive and grout in one good to use for this job? oh and lastly regarding laying wood down on the floorboards whats best to use?
thanx

marrtin
Foreman
Foreman
Posts: 374
Joined: Fri Oct 26, 2007 7:42 pm

by marrtin » Thu Nov 22, 2007 4:14 pm

1. Tile walls first - new floor cannot be damaged whilst doing walls.

2. Use waterproof adhesive and separate grout. (Tile shop will recommend best).

3. If tiling on to a wooden floor, check soundness first, then lay 6mm plywood fixed down every foot.

4. Use two part flexible adhesive (expensive stuff) for fixing floor tiles.

5. Do not grout same day as tiling.

bobplum
Foreman
Foreman
Posts: 364
Joined: Tue Sep 25, 2007 8:35 pm

by bobplum » Mon Nov 26, 2007 11:02 pm

i would agree with martin except on the ply wood i would recommend every 6 inches on 6 mm ply as 6mm ply would flex to much if can get awat with it i would use 9mm ply

gary79
Apprentice
Apprentice
Posts: 10
Joined: Thu Nov 08, 2007 8:21 pm

by gary79 » Fri Dec 07, 2007 9:33 pm

turns out. the floor under the lino is 1 inch thick chip board in real good nik, so i can tile straight onto it but do i need to do anything to the wood first?

marrtin
Foreman
Foreman
Posts: 374
Joined: Fri Oct 26, 2007 7:42 pm

by marrtin » Sat Dec 08, 2007 10:00 am

You could PVA first, but isn't necessary.

One point worth mentioning though, personally, I would still ply the floor first. Not for structural reasons, but for when the floor needs replacing in the future. Saves the hassle of having your ears burning when a tiler has to take it up in 10 years time. Lol.

gary79
Apprentice
Apprentice
Posts: 10
Joined: Thu Nov 08, 2007 8:21 pm

by gary79 » Sat Jan 19, 2008 12:05 am

finally finished floor, and people walked onit so had to lift and reset some tiles
they came up with some persausion but cant get the adheisive up
any ideas?
its like concrete

marrtin
Foreman
Foreman
Posts: 374
Joined: Fri Oct 26, 2007 7:42 pm

by marrtin » Sun Jan 20, 2008 12:42 am

Oh dear.

Bolster chisel and elbow grease is all that's on offer I am afraid. Or better still get those who walked on it!!!!

7 posts   •   Page 1 of 1
It is currently Sun Nov 03, 2024 12:20 pm