suprima 30 boiler keep locking out requiring resetting Help and information on all topics relating to your central heating, air conditioning and ventilation issues.

[thomasj]

hi all,

i have a 6 years old suprima 30 boiler from potterton. the last month it has been 'not right'. whilst on the timer, it would come on at the preset times but the duration of which is variable - from a few minutes to long enough to, i presumed, reach the pre-set water temperature before the boiler locks-out (red-light flashing). i would then have to manually press on the reset button to get the boiler working again. once it started the work again, the same scenario holds true i.e. it would then be on for a variable duration before locking out again. the same would happen when i set the boiler to be 'on' at all times i.e. it would work for a variable duration before it locks out requiring resetting.

can anyone advice/help as to: 1. what is the likely fault, 2. how to rectify it, and 3. whether it can be done safely as diy.

thank you all,
thomas

[frogger]

pcb on these are a problem and require replacement. It is a different pcb fitting so not so easy. Get someone in to do it.

[thomasj]

thanks frogger - apparently it was a very well known problem. guessed i am very lucky to have lasted into the sixth years before the problem surfaced. at the moment - i don't seem to have much luck getting an independent corgi engineer to come to have a look though.