Glass cutting Post questions and find answers on glazing, double glazing, upvc glazing, conservatory glazing, fixtures and fittings etc....

[foresterone]

I have to cut some greenhouse glass need to know the safest way to "snap" it after scoring with my new glas cutter :roll:

[winger]

A piece of wood about 6mm thick,ideally at least the length of the cut and about 50mm wide placed under the cut, then place a hand each side of the cut and push down firmly is your best bet. There are different techniques but due to the sometimes poor quality of horticultural glass, i would use this method.

[foresterone]

Thanks winger I found an old "T" square in my garage. This was ideal, I practised on broken sheet and then cut the other panes, excellent advic :lol: :lol: e