Noisy Boiler (Baxi Bermuda)
Help and information on all topics relating to your central heating, air conditioning and ventilation issues.

3 posts   •   Page 1 of 1
raymond45
Labourer
Labourer
Posts: 1
Joined: Mon Apr 07, 2008 9:38 pm

Noisy Boiler (Baxi Bermuda)

by raymond45 » Mon Apr 07, 2008 9:47 pm

I have recently had central heating problems. The pump was replaced but since then the boiler is making kettling sounds. I have tried varying the speed of the new pump but this doesn't cure the problem or reduce the noise. Could this be caused by a build up of sludge or scale? If this is the case could it be flushed.

ianr
Apprentice
Apprentice
Posts: 9
Joined: Tue Apr 08, 2008 8:47 am

Noisy Baxi

by ianr » Tue Apr 08, 2008 8:56 am

Sounds like air in the system as result of the pump change, if it has an auto air bleed it may be a simple case of turning on the filling loop until the pressure in the system reaches a stable presure of between 2-3 bar then turn off the filling loop. If the auto air bleed is working then the air will be removed by the addtional water.

If this doesnt cure it, I would suggest you invite your plumber back to complete the job they started.

htg engineer
Project Manager
Project Manager
Posts: 3256
Joined: Tue May 22, 2007 6:22 pm

by htg engineer » Tue Apr 08, 2008 2:56 pm

The Baxi Bermuda is a back boiler therefore there wont be a filling loop or pressure gauge on the boiler.

Read the post by SALLYTB

3 posts   •   Page 1 of 1