washing machine on wooden floorboards - house shakes! Help?
Help, advice, information, answers and tips on all types of flooring from laminate and carpet to timber and vinyl

6 posts   •   Page 1 of 1
sarahholder
Apprentice
Apprentice
Posts: 11
Joined: Fri Aug 10, 2007 1:11 pm

washing machine on wooden floorboards - house shakes! Help?

by sarahholder » Fri Jan 11, 2008 10:36 am

Hi, currently renovating our kitchen, victorian old floorboards down, some need replacing, but the washing machine (it's quite an old one) vibrates the whole kitchen and it can't be good long term for the floor as everything vibrates, plus it's in the middle of units and i'm worried about my new kitchen to be. As we've got all the old floor coverings up to replace some boards is there anything i can do to reinforce the floor just under the washing machine area? We will be getting a new washing machine in the future so again that may help?

REALLY appreciate advice / suggestions?

stevenc1603
Ganger
Ganger
Posts: 199
Joined: Tue May 08, 2007 12:59 pm

by stevenc1603 » Sun Jan 13, 2008 10:48 pm

I had the same problem in more modern property. Whole house shook when the thing went into spin cycle!

I was able to get under the house and prop the joists to stop them vibrating. Made things much better.

sarahholder
Apprentice
Apprentice
Posts: 11
Joined: Fri Aug 10, 2007 1:11 pm

by sarahholder » Mon Jan 14, 2008 9:24 am

Oh ok, when you say prop the joists, what did you do exactly? Slide wood struts under joists so they're too tightly packed to move?

rosebery
Project Manager
Project Manager
Posts: 2021
Joined: Wed Sep 26, 2007 9:55 pm

by rosebery » Mon Jan 14, 2008 9:37 am

Errrmm I would suggest that in BOTH cases detailed above the problem lies with the washing machine and not the floor or the house.

The WM drum is clearly out of balance for one reason or another. It sounds like you need to tackle the cause of the problem ie the washing machine.

Cheers

Johnnyvee
Labourer
Labourer
Posts: 3
Joined: Mon Nov 24, 2008 12:06 pm

by Johnnyvee » Mon Nov 24, 2008 1:17 pm

i have exactly the same problem - and it's not a case of the washing machine not working correctly. I have a brand new direct drive washing machine and it shakes the kitchen - things fall off the worktops etc.
Washing machines will always make the floor move to a certain extent - depends how the clothes lie in the drum when it goes into a spin.

Now for problem - 1901 terrace kitchen has a concrete sub floor with a suspended wooden floor above. Thing bounces around like made so - would the best way to stabalise it be 1. Link the joists with noggins between them and then 2. Install "props" in the area around the washing machine?

Thanks for any help.

TheDoctor5
Posts: 1381
Joined: Tue Jan 20, 2009 9:17 am

by TheDoctor5 » Mon Jan 26, 2009 10:05 am

Last year 64% of the questions asked in our forum were answered within our DIY project pages at www.diydoctor.org.uk/projects.htm The project pages are now separated alphabetically and your answers are accompanied by diagrams and the ability to see, and buy, the tools and/or required to complete your project. Use our search box to look for your answer and save a great deal of time and money!

6 posts   •   Page 1 of 1
It is currently Tue Nov 05, 2024 3:27 pm