I recently upgraded my sky system to Sky+HD with multi-room, however when the sky installer came to my home he said it was not possible to have the multi-room facility and the record/playback function due to the fact that our building is connected to a communal ariel system. And since I did not have a sat dish he said the local authority does not permit sky to erect them. He gave me the option of pulling out of the upgrade but I decided to go ahead in the hope that I would be able to iron out all the issues. The installer very kindly let me have a dish from his van along with some co-ax connectors. I purchased 100m of 75 ohm co-axial cable, a satellite meter/finder. I erected the dish, ran the cable to the set-top boxes (wires not touching), got an alignment reading of 9.2, (the meter goes up to ten). But my TV shows the message (both of them), NO SATELLITE SIGNAL BEING RECIEVED. I tried moving the dish to which ever position with someone watching the tv screen but to no avail. I contacted Sky again, they asked from where I got the dish from, and not wishing to get the installer into trouble I said that I bought it from a specialist shop. They said that since the dish is not theirs then they cannot help.
Crikey! Here I am forking out more :( for a system than what I started with, and getting none of the benefit, not to mention £50 outlay on cable and sat/meter, and Sky won`t help.
I would be very greatful if anyone can provide a technical solution to my problem, maybe there is something I`ve missed.