Fixing Toilet Bowls To The Floor
All aspects of plumbing questions and answers, help, tips and information

5 posts   •   Page 1 of 1
Billy Whiteside
Labourer
Labourer
Posts: 1
Joined: Mon Dec 08, 2008 11:48 am

Fixing Toilet Bowls To The Floor

by Billy Whiteside » Mon Dec 08, 2008 11:56 am

My plumber wants to stick a toilet bowl to a tiled floor rather than fixing it with srews. Is this sensible ? :shock: [color=brown][/color][size=18][/size]

matthewm1965
Tradesman
Tradesman
Posts: 31
Joined: Sun Nov 09, 2008 12:28 pm

by matthewm1965 » Mon Dec 08, 2008 12:34 pm

I have stuck down two now in our house, using silicone sealant.
Neither have moved yet after a year of daily use.
Matt

chris_on_tour2002
Project Manager
Project Manager
Posts: 1024
Joined: Thu Aug 30, 2007 10:14 pm

by chris_on_tour2002 » Mon Dec 08, 2008 7:58 pm

better to use screws although it is quite common for plumbers these days to use silicone alone to secure toilet pans. personally i use both. it should hold fine.

plus side it does save making holes in the tiles.

plumbbob
Project Manager
Project Manager
Posts: 1892
Joined: Wed May 07, 2008 10:59 pm

by plumbbob » Mon Dec 08, 2008 11:24 pm

I always stick the toilet down with silicone whenever an underfloor heating mat has been installed. I know the mat shouldn't actually be under the toilet, but am too scared to even think about drilling anywhere near it.

Once stuck, as matthewm1965 says, they don't move.

Clyde
Labourer
Labourer
Posts: 3
Joined: Tue Dec 23, 2008 1:56 pm

by Clyde » Tue Dec 23, 2008 2:49 pm

I actually had this dilemma a few weeks a go. In the end, after thinking long and hard I went with screwing to the floor (tiled) with the screws/bolts that came with it, and nice chrome screw caps. If in the future I need to get to water inlet/soil pipe (everythng is enclosed/back to wall toilet) I just undo the side screws and slide the toilet pan out nice and easy!

I've been in a position in the past were pans have been stuck down with sealant and its a nightmare prising it from the sealent, then you've got all the sealant to scrape away if you then re-seal.

5 posts   •   Page 1 of 1
It is currently Fri Nov 22, 2024 12:47 pm