Single brick walls
All manner of questions and solutions to problems and issues surrounding the subject of brickwork, blockwork and stonework

5 posts   •   Page 1 of 1
bigfish69
Labourer
Labourer
Posts: 1
Joined: Sun Mar 16, 2008 7:31 pm

Single brick walls

by bigfish69 » Sun Mar 16, 2008 7:46 pm

Hi, ive got a brick workshop in my garden that i want to convert into my own pub but the walls are only single brick so the place is cold and damp.I intend to put a new concrete floor down with a membrane under but i really dont want to go to the expense of blocking a new internal wall in the building so does anyone have any suggestions as to how i can prevent the damp. Is a damp proof paint any good? I am going to install a woodburner in the pub, would this cause problems? Any help would be most appreciated. Many thanks

Perry525
Site Agent
Site Agent
Posts: 733
Joined: Fri Jul 06, 2007 8:35 pm

single brick walls

by Perry525 » Sun Mar 16, 2008 8:52 pm

Hi, its understandable that its cold and damp with only a single brick wall between you and the outside.
However, it you stop and think, you will realize that millions of homes that have cavity walls and no cavity insulation are in the same situation. (But don't know it)
The solution is quite simple, stick 4 inch polystyrene to the walls with the stuff they use to stick plasterboard. Nail the same to the ceiling and you will have an uncomfortably warm room.

As polystyrene gets damaged rather easily give it a coat of plaster if you wish, this will make the room a bit cooler.
Perry

sggraham
Apprentice
Apprentice
Posts: 6
Joined: Thu Jan 01, 2009 1:31 pm

plaster

by sggraham » Thu Jan 08, 2009 5:57 pm

hi can i plaster directly to polystyrene?

the specialist
Ganger
Ganger
Posts: 87
Joined: Wed Dec 31, 2008 10:16 am

by the specialist » Fri Jan 09, 2009 6:47 pm

Hi,

You cant plaster direct to polystyrene. Damp proof paint wont really do much good in this application

I recommend 3X2 stud wall just off the inner wall (use treated timber). Fill with 50mm thick kingspan or ecotherm which is cheaper but has same insulation value. Cover with polythene vapour barrier. 13mm plaster board and skim. Treat outside walls with resin based waterproofer which will last up to 10 years. You will find it to be very cosy.

Aidan

TheDoctor5
Posts: 1381
Joined: Tue Jan 20, 2009 9:17 am

by TheDoctor5 » Thu Jan 22, 2009 9:32 am

Last year 64% of the questions asked in our forum were answered within our DIY project pages at www.diydoctor.org.uk/projects.htm The project pages are now separated alphabetically and your answers are accompanied by diagrams and the ability to see, and buy, the tools and/or required to complete your project. Use our search box to look for your answer and save a great deal of time and money!

5 posts   •   Page 1 of 1
It is currently Sun Nov 03, 2024 1:06 pm