The pump is running.
There were some coins in the sump hose, have checked the drain hose which is clear, as is the plastic connector that the drain hose is connected to at the sink end.
It completes a cycle still without draining or spinning.
Many thanks.
Yes, the impellor is turning fine, there's nothing obstructing it.
It will spin once the water is drained manually, could there be a blockage anywhere else? or could it be a part that needs replacing?
Not draining - it's the pump or blockage. As you say it works if drained by hand. Either the pump isn't working properly or the pump isn't running for long enough.
How much water comes out of the hose when the pump is running ?
Last year 64% of the questions asked in our forum were answered within our DIY project pages at www.diydoctor.org.uk/projects.htm The project pages are now separated alphabetically and your answers are accompanied by diagrams and the ability to see, and buy, the tools and/or required to complete your project. Use our search box to look for your answer and save a great deal of time and money!
It was a blockage in the drain hose - was fine at either end but twisted in the middle behind a fitted kitchen unit. :oops:
Thank you.
(Haven't been on this site for some time!)
[quote="htg engineer"]Not draining - it's the pump or blockage. As you say it works if drained by hand. Either the pump isn't working properly or the pump isn't running for long enough.
How much water comes out of the hose when the pump is running ?
