I HAVE HOT WATER BUT NO HEATING All aspects of plumbing questions and answers, help, tips and information

[shawn]

HI the heating didnt come on tuesday evening so i checked the programmer and there was no display,so i changed the 3 amp fuse and i got the display back and both lights came on for the heating and water, but nothing happened until i turned the cylinder stat up and then the boiler sparked up but only for hot water not heating. so i bought another programmer and room stat but i still have the same fault, could it be the two port motorised valve for the heating as the one for the hot water does operate??

[stoneyboy]

shawn,
It's your next thing to try - push the lever over to the open position and see if the heating comes on (you may have to hold the lever hard against the end of the slot for the boiler to operate).
end

[Steve the gas]

Hi Shawn,

Yep, sounds like the 2 port MV- just change head (motor) to check.

Hth

[TheDoctor5]

If you type the key words of your question into our search box to the left of the site you may find the answer is already posted or is in the DIY projects section of the website. Every post goes through a monitoring process and using the search box may speed up your answer.