pipes banging
Help and information on all topics relating to your central heating, air conditioning and ventilation issues.

4 posts   •   Page 1 of 1
cerdyn
Apprentice
Apprentice
Posts: 14
Joined: Sat May 12, 2007 7:07 pm

pipes banging

by cerdyn » Sat May 12, 2007 7:42 pm

Hi - problem is that when tap is turned off there is a loud banging / hammer noise from the pipework. Most noticable on pipe to bathroom sink which is upstairs. Problem can be avoided if tap is turned off very slowly. Any help would be appreciated. Many thanks.

thedoctor
Posts: 2530
Joined: Sat Apr 08, 2006 1:15 pm

by thedoctor » Sat May 12, 2007 8:43 pm

See our project on water hammer. www.diydoctor.org.uk/projects.htm

cerdyn
Apprentice
Apprentice
Posts: 14
Joined: Sat May 12, 2007 7:07 pm

water hammer

by cerdyn » Fri May 25, 2007 12:04 am

I've checked water hammer project as suggested but it seems to deal with problem with valve in tank. There is no tank as system is fed from the mains. The hammer occurs when the hot water is turned off. Many thanks - Steve

htg engineer
Project Manager
Project Manager
Posts: 3256
Joined: Tue May 22, 2007 6:22 pm

by htg engineer » Sun May 27, 2007 1:27 pm

check water pipes are secure, normally just a pipe vibrating, against another or against joist or floor board. If pipes are secure see if they touch anywhere, and insulate or lag pipes with foam or something similar. or try closing the mains stop tap slightly just to reduce the pressure entering the property.

4 posts   •   Page 1 of 1