Drylining onto lathed wall or brick Ask your questions and find answers on many subjects relating to plastering and dry lining

[andyclark]

I am about to start removing loose plaster and dryline. Should I fix the new boards to the existing lathed wall, or remove the lathes and dob and dab directly on to the brick?

Cheers,
Andy

[kbrownie]

Hi Andy,
if it's a lathe wall, will timber frame behind it. I'd recommend you remove the plaster and lathe. It's a messy time consuming job especailly when it comes to pulling the nails out of the timber, but worth it in the long run gives a good sound surface to board on to and you can also insulate the inside stud work.
KB

[rosebery]

The latter - you'll find it a lot easier to get it vertical.

Cheers

[stoneyboy]

andyclark,
Be sure that the wall was not L&Pd for a reason, if its an outside solid wall covering with plasterboard can create damp problems.
end

[andyclark]

Cheers folks. Much appreciated. I'm new to this game so wish me luck.

[kbrownie]

GOOD LUCK!
KB

[rosebery]

Be sure that the wall was not L&Pd for a reason, if its an outside solid wall covering with plasterboard can create damp problems.

Thats a valid point but as long as the DPC isn't bridged I don't see a major problem.