Surface area of sloped roof from arial photo Information, help and advice on many architecture, self build and design problems and issues

[stevex710]

Is it possible to calculate an esimate value for the surface area of a roof.
roof in question is a hip roof - 2 triangles at either end of roof.

i know the length and width of the roof but because of the slope wouldnt the surface area of the roof be larger?

cheers

[Perry525]

Yes it is bigger.
Measure the roof angle in the vertical plane, transfer onto graph paper, measure and there's your answer.

[TheDoctor5]

Last year 64% of the questions asked in our forum were answered within our DIY project pages at www.diydoctor.org.uk/projects.htm The project pages are now separated alphabetically and your answers are accompanied by diagrams and the ability to see, and buy, the tools and/or required to complete your project. Use our search box to look for your answer and save a great deal of time and money!

[youasked]

If you have concrete Marley type tiles, a general rule is: Count the tiles from gutter to ridge. Divide by three (3 tiles per meter) that is your height,
Measure the triangle hip, half way along the gutter (from point of hip) to end of gutter. (does that make sense?) (Or you can measure the whole width and half it). Multiply the height x the half width and that give you the size.

Example: 15 tiles from gutter to top of hip. = 5 mtrs.
12 mtrs width (divided by 2 = 6) = 6 mtrs
6x5= 30 mtrs
If detatched house then there are two ends = 60 mtrs.

The front can be done the same way by divideing the roof into 2 x triangles and one rectangle.

NB: as the traingles in all cases are right angled, you only have to calculate one on each facet, as the other is the same. " 2 X triangles make a square (or rectangle). send ME A JPEG AND i WILL DO IT FOR YOU.