Combined radiator and underfloor heating
Help and information on all topics relating to your central heating, air conditioning and ventilation issues.

6 posts   •   Page 1 of 1
agb32
Apprentice
Apprentice
Posts: 6
Joined: Tue Jul 31, 2007 9:19 am

Combined radiator and underfloor heating

by agb32 » Fri Jun 05, 2009 8:42 am

Hi,
Can anyone give advice about whether it is possible to have a mixed radiator and underfloor heating (hot water) powered from the same boiler? ie have some rooms that use radiators, and other rooms that have underfloor heating?

Would the system be ok from a control point of view (ie stop the underfloor heated rooms getting hot too quickly)?

Any points to think about?

Thanks...

htg engineer
Project Manager
Project Manager
Posts: 3256
Joined: Tue May 22, 2007 6:22 pm

by htg engineer » Sat Jun 06, 2009 7:54 pm

It is possible to mix, and the underfloor heating will be controlled by thermostats and motorised/zone valve for each underfloor installation.


htg

agb32
Apprentice
Apprentice
Posts: 6
Joined: Tue Jul 31, 2007 9:19 am

by agb32 » Mon Jun 08, 2009 7:43 pm

Any idea if its possible to do it without the motorised valve? I'm not keen on them - one extra point to fail. Thermostatic valves maybe?

htg engineer
Project Manager
Project Manager
Posts: 3256
Joined: Tue May 22, 2007 6:22 pm

by htg engineer » Tue Jun 09, 2009 4:40 pm

You could fit TRV's to the radiators but not to the underfloor heating.


htg

agb32
Apprentice
Apprentice
Posts: 6
Joined: Tue Jul 31, 2007 9:19 am

by agb32 » Wed Jun 10, 2009 8:20 am

Thanks for the reply - but would that work well? I would guess that the underfloor heated part of the house would heat up fastest, and then would need to be shut off while the radiator part is still heating up? In which case, I'd really want some sort of thermostatic control on the underfloor heating...

htg engineer
Project Manager
Project Manager
Posts: 3256
Joined: Tue May 22, 2007 6:22 pm

by htg engineer » Wed Jun 10, 2009 7:07 pm

I know - I said you could fit TRV's to the radiators (meaning to control radiators only) you will have to fit a thermostat and motorised valve as said in my first post - if you don't want to fit one - forget the underfloor heating.


htg

6 posts   •   Page 1 of 1