Excavation depth for concrete floor?
Drainage pipes, concrete, footings and foundations. Post your questions and find answers here

2 posts   •   Page 1 of 1
Urchin
Apprentice
Apprentice
Posts: 10
Joined: Thu Jun 04, 2009 8:15 pm

Excavation depth for concrete floor?

by Urchin » Wed Sep 09, 2009 9:45 am

Hi there

Our building regs inspector has told us to use the following for out concrete floor

6 inches of hardcore, "then whacker it"
2 inches of sand "then whacker it"
Insulation (we have bought 100mm)
Damproof
4 inch concrete
3 inches screed. (my husband says this sounds like too much screed though? is 3 inches right?)

How much can we expect the hardcore to compress?

What is the total depth we need to excavate?


Thanks!

stoneyboy
Project Manager
Project Manager
Posts: 6529
Joined: Wed Dec 10, 2008 6:44 pm

by stoneyboy » Sun Sep 13, 2009 9:55 pm

Urchin,
You'll need to dig out 20" below FFL and if the BI says 3" screed and you want BR approval thats what you must lay.
Your hardcore should be crushed (no large pieces eg bricks) and it will compress about 20% with the wacker plate but this will depend on how loose it is when tipped.
end

2 posts   •   Page 1 of 1
It is currently Fri Nov 01, 2024 2:28 am