Toilet Does Not Flush
Drainage and wastage systems and plumbing help, advice and answers

5 posts   •   Page 1 of 1
PaulPet
Labourer
Labourer
Posts: 3
Joined: Mon Jan 11, 2010 3:01 pm

Toilet Does Not Flush

by PaulPet » Mon Jan 11, 2010 3:03 pm

Hi all

My cloakroom toilet does not flush.

I bought it from B and Q. It has a silver button on top of the cistern that we push to flush.

The buttons are set at the bottom of the hole (pushed right down) and will not come back to the top.

Can anyone help please??

stoneyboy
Project Manager
Project Manager
Posts: 6535
Joined: Wed Dec 10, 2008 6:44 pm

by stoneyboy » Mon Jan 11, 2010 8:50 pm

PaulPet,
The mechanism is stuck, remove the lid, free the mechanism, replace the lid.
end

PaulPet
Labourer
Labourer
Posts: 3
Joined: Mon Jan 11, 2010 3:01 pm

by PaulPet » Tue Jan 12, 2010 9:50 am

Can you be more explanatory please. The mechanism means nothing to me.

There are lots of blue and white plastic tubes in there, and a blue wire thing that goes up to a small unit under the lid.

stoneyboy
Project Manager
Project Manager
Posts: 6535
Joined: Wed Dec 10, 2008 6:44 pm

by stoneyboy » Wed Jan 13, 2010 8:08 pm

PaulPet,
All the plastic tubes should be connected somewhere. If they are not water may have been sucked into the push button.
The flush mechanism is basically a plunger which lifts to flush the loo, the cances are that this is stuck. Try lightly rocking the central column in the cistern an see if this will free the plunger.
end

PaulPet
Labourer
Labourer
Posts: 3
Joined: Mon Jan 11, 2010 3:01 pm

by PaulPet » Sun Jan 17, 2010 8:56 pm

Thanks but the centre plunger can move, it's the buttons on the lid that are stuck down. I can't get them to come up to the top.

5 posts   •   Page 1 of 1
It is currently Wed Dec 04, 2024 7:27 pm