Mix LV and mains voltage downlighters
Ask questions and find answers to many subjects relating to electrics and electrical work

3 posts   •   Page 1 of 1
jemball
Tradesman
Tradesman
Posts: 41
Joined: Sat May 12, 2007 3:37 pm

Mix LV and mains voltage downlighters

by jemball » Sun Jan 31, 2010 12:10 pm

Is it possible to mix LV and mains voltage downlighters on the same circuit?
I have 9 LV down lights in a 2way switch circuit, where one of the switches is a dimmer.

2 of the electronic transformers have failed and I am wondering if I can simply replace them with mains voltage bulbs.

Thanks for any advice.

ericmark
Project Manager
Project Manager
Posts: 2870
Joined: Fri Oct 02, 2009 9:49 pm
Location: Llanfair Caereinion, Mid Wales.

by ericmark » Sun Jan 31, 2010 9:45 pm

First I must point out 230vac is low voltage. Below 50vac is Extra low voltage and 55/63-0-55/63vac (110vac) is reduced low voltage.

There is no reason why you shouldn't mix the voltages as all the switching is done on low voltage side and the inverter/transformer is connected after the switch.

Of course there will be exceptions. Possible in some areas in a bathroom for example or where wiring does not include an earth connection.

jemball
Tradesman
Tradesman
Posts: 41
Joined: Sat May 12, 2007 3:37 pm

by jemball » Mon Feb 01, 2010 11:33 am

Thanks a lot erickmark for a most helpful reply.

Regards John

3 posts   •   Page 1 of 1
It is currently Thu Dec 26, 2024 9:40 pm