cold wall
Re-generate an old or tired space and give it a fresh breath of life. Click here for answers, information and tips

2 posts   •   Page 1 of 1
katiesdad
Tradesman
Tradesman
Posts: 31
Joined: Mon Feb 09, 2009 5:47 pm

cold wall

by katiesdad » Wed Feb 17, 2010 3:40 pm

When you convert a loft in an old terraced house, the brick walls in the loft area (party walls) are normally made from solid 9 inch brickwork. So if I run the new stairs up the party wall, the wall below the ceiling is adjoining another ‘warm’ wall. But when it passes through to the loft area it will be adjoining a ‘cold’ wall. Is this normally ignored by the Building Inspector, or do I have to have a nasty looking step in the wall, with some form of insulation behind?

stoneyboy
Project Manager
Project Manager
Posts: 6537
Joined: Wed Dec 10, 2008 6:44 pm

by stoneyboy » Sun Feb 21, 2010 6:48 pm

katiesdad,
Ask the building inspector, you can bet whatever advice you get from this forum the BI will have a different opinion.
Have a look at the party wall in the loft area it is quite common for this wall to be single skin so you could add insulation without getting a step.
end

2 posts   •   Page 1 of 1
It is currently Mon Dec 23, 2024 12:18 am