contol a light from three switches ( two already wired )
Ask questions and find answers to many subjects relating to electrics and electrical work

3 posts   •   Page 1 of 1
petere
Labourer
Labourer
Posts: 2
Joined: Thu Apr 29, 2010 4:37 pm

contol a light from three switches ( two already wired )

by petere » Sat May 01, 2010 12:41 pm

I already have atwo way light on my landing controlled from th landing and the b ottom of the stairs. I have added further bedrooms and therefore need aanother switch wired in to control the light

ericmark
Project Manager
Project Manager
Posts: 2870
Joined: Fri Oct 02, 2009 9:49 pm
Location: Llanfair Caereinion, Mid Wales.

by ericmark » Sun May 02, 2010 1:00 am

It's called an intermediate switch sorry pictures not allowed on this forum

sparx
Project Manager
Project Manager
Posts: 2166
Joined: Wed Mar 21, 2007 8:33 pm
Location: The fifth continent.

by sparx » Sun May 02, 2010 4:16 pm

Hi as ERIC says this uses an intermediate switch with 4 connections and requires 2 twin and earth cables connected either into one of the 2 way switches or cut into the 3 core/E between the existing 2 way switches.
Don't think this forum has a circuit drawing as not easy to show and many ways to achieve connections none of which are easy DIY!
I would seriously recommend getting a leckie in for this but if you think your ability/knowledge good enough then you need to locate a drawing of what's needed (ie which 2 colours of the 3 core are connected to L1& L2 of switches).
Far to easy to get it wrong for me to try and explain on line,
take care, Sparx

3 posts   •   Page 1 of 1
It is currently Thu Jan 16, 2025 6:55 pm