Tiling over cork floor tiles
Advice and information on tiling and fixing tiles to a variety of surfaces

2 posts   •   Page 1 of 1
robofleeds
Labourer
Labourer
Posts: 2
Joined: Tue May 25, 2010 9:15 pm

Tiling over cork floor tiles

by robofleeds » Tue May 25, 2010 9:24 pm

Have read all the other posts on here about tiling over a range of other floor surfaces (including laminate!) but can't find any reference to cork floor tiles. These are in an en-suite so it's a small area, they are quite thin, are well stuck down and have been sealed. I was thinking of raking the surface to give a good bond for the adhesive, but do the same warnings as given elsewhere apply to cork? If so, could I just overlay the cork tiles with ply and tile onto that? The sub-floor is flooring grade chipboard so it would hold a screw. Anything rather than have to try and get the tiles up!!!

plumbbob
Project Manager
Project Manager
Posts: 1892
Joined: Wed May 07, 2008 10:59 pm

by plumbbob » Wed May 26, 2010 8:02 pm

Never tiled over cork or ever seen it mentioned. However, I don't think it is really of any significance.

You shouldn't tile straight on to the floor anyway, you must ply the floor first to remove any flex and create a separate layer not only so the existing floor can expand without damaging the tiles, but it can easily be removed in the future.

I don't see any reason not to ply over the existing tiles providing they are firm. Just use a screw long enough to penetrate the floor but not so long as it damages pipes below. (Been there, done it!)

2 posts   •   Page 1 of 1
It is currently Tue Nov 05, 2024 1:59 pm