by eggers »
Tue Jul 06, 2010 9:51 pm
the minimum setting on the solo stat is about 55 or 60 degrees, so it will feel hot, use thermometer.
i'm guessing you have an open vented system and you are referring to the header tank? probably the water level is too high and as the water heats and expands in the system it rises in the tank and pushes out the over flow, try lowering the water level by adjusting the arm or replace the ball valve and set water level alot lower.
if you have a sealed system and you are referring to the pressure relief pipe then if is probably the expansion vessel has lost it's charge or it's diaphram has ruptured